fluke-708-709H-datasheet
Fluke 709 Precision mA Loop Calibrator
Hart communications
The 709H adds HART communications and supports a select set of the HART universal and common practice commands. This makes the 709H unique as both an
affordable, compact loop calibrator and powerful HART communication troubleshooting tool.
In the communicator mode the user will be able to read basic device information, perform diagnostic tests, and trim the mA output on most HART enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with HART modem. Fluke 709H will allow virtually any technician to service and support HART devices.
Saving time, getting answers
In addition, the 709H offers:
- Logging of HART data in the field. Once recorded by the 709H in the field, the 709H/ TRACK software can upload the HART configuration of up to (20) HART devices in your plant and output data in either (.csv) or (.txt) format.
- Data logged mA loop measurements and HART data can be recorded from a particular transmitter for troubleshooting and loop tuning. The data log feature offers selectable capture with recording intervals of 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions.
Each data sample contains the 709H mA measurement, all four process variables, and the standard status conditions.
Product highlights
- Best-in-class accuracy at 0.01% reading
- Compact rugged design
- Intuitive user interface with Quick-Set knob for fast setup, easy use
- 24 V DC loop power with mA measure mode (-25% to 125%)
- Resolution of 1 µA on mA ranges and 1 mV on voltages ranges
- Built in selectable 250 Ω resistor for HART communications
- Simple two wire connection for all measurements
- Auto shutdown to conserve battery life
- Variable step and ramp time in seconds
- Valve test (source and simulate defined mA values with % keys
