Megger 1KV Insulation Tester

Megger 1KV Insulation Tester

The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc.
Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.
A variable range has been added to allow any intermediate voltage from 10 V to 1000 V in 1 V steps, where application specific test voltages are required that do not appear in the standard ranges.*
Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options.
Replacing the original MIT400 instruments these units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access.
All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.

THE MIT400 RANGE:
The range consists of four instruments:
MIT400/2       250 V, 500 V and 1000 V
MIT410/2       50 V, 100 V, 250 V, 500 V and 1000 V+ PI, DAR
MIT420/2       50 V, 100 V, 250 V, 500 V and 1000 V +
PI, DAR + VAR and result storage
MIT430/2       50 V, 100 V, 250 V, 500 V and 1000 V +
PI + DAR + VAR + Bluetooth® download

INSULATION RESISTANCE TESTING:
The stabilised insulation test voltage is now accurate to +2% -0%. This compares to the industry standard +20%, providing a more accurate test voltage without the risk of over-voltage damage to circuits or components. The output voltage is maintained between 0 and 2% throughout the test range.
Where a non-standard test voltage is required, a variable range allows the exact test voltage to be selected from 10 V up to 1000 V. and is subject to the same stabilised output control.*
* Dependent on model